Before replacing the ice maker assembly, check the water inlet valve, water line, and fan. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly. One component of the ice maker assembly might be defective. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. Make sure that the water pressure to the valve is at least 20 psi. The valve requires at least 20 psi to function properly. As a result, the ice maker won’t make ice. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the evaporator coils are frosted over, part of the defrost system has likely failed. In addition, check to see if frost has accumulated on the evaporator coils. If the freezer temperature is too high, ensure that the condenser coils are clear of debris and the condenser fan is working properly. ![]() ![]() The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the ice maker to work properly. If the freezer temperature is above 10 degrees Fahrenheit (-12C), the ice maker will not produce ice cubes efficiently. Freezer Temperature is Above 10 Degrees F (-12C)
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |